<VV> 1964 Model question

[Shaun]

I'd look at the front mounts to make sure everything is symmetrical, also
the bolts from the transmission to the crossmember for tightness (and
shims).

yea, Vairily ... Shaun

----- Original Message ----- 
From: "john" <jncmiller at mchsi.com>
To: <virtualvairs at corvair.org>
Sent: Friday, August 18, 2006 3:43 AM
Subject: <VV> 1964 Model question


The engine in my 64 leans down from level about an inch on the drivers side.
The mounts look ok but are old of course. What should I look for that could
be causing this?

Matt Miller
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are
the property
of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America,
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
 _______________________________________________