<VV> dropping gas tank.

[J R Read_HML]

The stabilizer bar should be completely removed - takes about 5, maybe 10 
minutes tops.  I don't understand the problem.  You have not even gotten to 
the hard part yet - the hoses.

Later, JR

Past, present and future posts to Virtual Vairs by this writer are for
the private use of Virtual Vair members only.  Reproduction, including
archiving, outside of the Virtual Vairs is specifically prohibited.

----- Original Message ----- 
From: "Paul Abel" <pbob63 at frontiernet.net>
To: <virtualvairs at corvair.org>
Sent: Thursday, August 10, 2006 7:09 AM
Subject: <VV> dropping gas tank.


>I have my tank drained and ready to remove. I've removed 4 bolts. 2 at each 
>end of stabilizer bar. It is still suspended by 2 bolts above it. I'm able 
>to rotate the bar forward and up slightly, but it doesn't appear to clear 
>the tank. My question is, is the stabilizer bar supposed to completely 
>clear the tank in order to get it out? I can't seem to move the bar any 
>further without it hitting the coil springs. I'm assuming (and hoping) that 
>I don't have to completely remove the s bar from the car, rather swing it 
>out of the way.
> Thanks,
> Paul Abel
> 65 Monza sedan 110pg.
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs 
> _______________________________________________
>
>
> -- 
> No virus found in this incoming message.
> Checked by AVG Free Edition.
> Version: 7.1.405 / Virus Database: 268.10.8/415 - Release Date: 8/9/2006
>
>