<VV> 140 exh manifold studs?

[Sethracer at aol.com]

In a message dated 4/16/2006 8:00:21 PM Pacific Daylight Time,  
AeroNed at aol.com writes:

You can  get the studs from vendors, FLAPS or even a hardware store. I think  
 
they are 38/-16 on one end and 3/8-24 on the other. They are about 2  inches  
long.  




They would be coarse at both ends, (3/8-16) unless you change to  fine-thread 
nuts!  But go find the stainless steel if you can wait. -  Seth