<VV> TOWING wiring harness >?

[UltraMonzaWest at aol.com]

In a message dated 4/16/06 7:51:26 AM Pacific Daylight Time, SNAKBITT at aol.com 
writes:


> The plugs have two wires that terminate in rounded solder contacts 
> that match up with the contacts for the normal light. Additionally, the 
> second 
> harness then has wiring and a socket to replace the stock bulb sockets. The 
> wiring proceeds to a flat plug "with protection cap" that looks like a 
> trailer 
> connector. The connector has 4 female connections with 1 male ground prong. 
> It 
> is about 1 and ½ inched wide and about 7/16 inches thick, much larger than 
> the ones you see at FLAPS today. I cleaned the flat trailer plug with 
> solvent 
> but can find no name or numbers on the plug. Does anyone on the list know, 
> if 
> G/M put out anything like this stock, or is it an interesting after market 
> useless bunch of wires?
> 
> 
************************************************************************
The 2nd harness is for when you TOW  YOUR CORVAIR!    swap it in and run the 
plugged wires forward to the pulling vehicle...

Matt Nall
65/66/69/DB/BT
Coos Bay, Ore.