<VV> 63 Monza 900 Antenna

[J R Read_HML]

I never had a 63, but all the 60s and 70s antennas I can remember come off 
from the top side.  Just unscrew that nut (might be just two flats) and 
everything gets loose.  There is a swivel "catch" on the underside of the 
fender at the bottom of the antenna which is what that nut tightens against. 
No need to disassemble any other part of the car.

Attachments (if any) are scanned with anti-virus software.

Later, JR

----- Original Message ----- 
From: "Chris C, Warwick RI" <ricorvair at cox.net>
To: <virtualVairs at corvair.org>
Sent: Wednesday, September 28, 2005 4:36 PM
Subject: <VV> 63 Monza 900 Antenna


>I am stumped.  Want to put new antenna on my wifes car.
>
> Can not figure out how to get the vent out so that I can access the area 
> in the fender where the antenna goes.
>
> Did not want to distruct disassemble and not be able to get it back 
> together.
>
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs 
> _______________________________________________