<VV> ramping starts but races

[UltraMonzaWest at aol.com]

In a message dated 10/15/2005 5:50:33 PM Pacific Daylight Time, 
khammett at stainlessfab.com writes:

> Rebuilt 1965 110hp motor and carbs.  The carbs I
> double and triple checked the float level and drop.  I only have one choke
> set up as the other "coupler" (the piece that the top rod screws into)
> came off.  I don't believe that this should cause the racing engine.  What
> have I missed.  What do I need to check?  Any help would be greatly
> appreciated
******************************************************************************
*****************
Nothing INSIDE the carbs will make it idle fast

1  have you disconnected the likages at both carbs?

2  have you backed out / removed the idle speed screws?

Most likely one is the culprit!

Matt Nall / Patiomatt / WCUH / Mr. DeckRug
69 Monza Cpe., 66 Monza vert, 65 Crown v8 Cpe.
Somewhere between Reno, NV and Coos Bay, Or.