Fw: <VV> lower shroud question

[Shaun]

----- Original Message ----- 
From: "Shaun" <shaun_mcgarvey at shaw.ca>
To: <dsjkling at sbcglobal.net>
Sent: Saturday, October 15, 2005 7:58 AM
Subject: Re: <VV> lower shroud question


> Right. I haven't worked on many 60-61s. I believe the shroud was changed
for
> or during 62.
> Shaun
>
> ----- Original Message ----- 
> From: "Dan & Synde" <dsjkling at sbcglobal.net>
> To: "Shaun" <shaun_mcgarvey at shaw.ca>
> Cc: "Virtual Vairs Submission" <virtualvairs at corvair.org>
> Sent: Friday, October 14, 2005 8:33 PM
> Subject: RE: <VV> lower shroud question
>
>
> > Hi Shaun,
> >
> > I have early style lower shrouds and the pin is "captured" by the spot
> > welded assembly.  Someday I'm going to modify them and bore a hole so I
> can
> > remove the pin and replace the bushings easily.  I'm not sure what year
> the
> > removable pin with the metal tab was added to the Corvair lineup.  What
> your
> > suggesting would work in Art case though :)
> >
> > Dan Kling
> >
> > -----Original Message-----
> > From: Shaun [mailto:shaun_mcgarvey at shaw.ca]
> > Sent: Friday, October 14, 2005 8:07 PM
> > To: dsjkling at sbcglobal.net; MONZA63MO at peoplepc.com
> > Cc: Virtual Vairs Submission
> > Subject: Re: <VV> lower shroud question
> >
> >
> > Instead of fighting with the "Jesus" clip on the damper door rod, I just
> > pull the pivot pin and remove the shroud, door and rod as an assembly.
> >
> > yea, Vairily ... Shaun
> >
> >
> >
>