<VV> ANFSCD - Harmonic Balancer

[NicolCS at aol.com]

<snip>How do you remove the bolt from the balancer & "torque to specs" after 
replacement ? This is a powerglide car so cannot just put in gear and set 
the brake. Suggestions please. Padgett <unsnip>

Stick a screwdriver (or drift or 6" 3/8" extension) through one of the three 
slots in the balancer hub, hold it so it stays straight, then torque the bolt. 
 The (screwdriver, drift, extension) will catch something on the rear accy 
housing and "trap" the balancer.  


ANFSCD sorta sounds like "Another Fine Sunny California Day."  Are we 
left-coast / right cost confused?

craig n   ANFSID