<VV> Control arm bolts

[Tom Wright]

Hi Alan.

I assume these are the lower bolts that have the offset washer for alignment. Rust must be holding them in. They have another washer on the inside of the crossmeber bracket, and any rust on the bolt makes them resistive to removal.

Lube and BFH and new bolts.

>I am trying to remove the control arm from the crossmember. I have removed 
>the nuts  but can't get the bolts out. Are the four bolts threaded into the 
>control arm bracket as well as being held by the nuts?
>Thanks in advance,
>Alan

Tom Wright
St.Catharines
www.vaxxine.com/tomspage
66 Corsa 140
Corsa Ontario
CORSA