<VV> Front suspension upper A-arms

[UltraMonzaWest at aol.com]

In a message dated 5/3/2005 8:27:46 AM Pacific Daylight Time, 
chartzel at comcast.net writes:

> There is definitely a difference in the upper arms.  I looked at an
> assembled front end when I just rebuilt a front suspension for my dune
> buggy.  The upper arm has a thick side and a thinner side.  The thick side
> or higher side goes toward the front as far as I can tell.  My ball joints
> are almost vertical from one another, which doesn't seem right.  You would
> think the upper ball joint should trail the lower one to give you castor.
> Would any Corvair mechanics like to chime in here?
> Clark Hartzel
> 
******************************************************************************
********
This Suspension was designed for street...a few degrees.....not even a 
1/4"...

You'll need to shim the whole assembly to get lots more...


Matt Nall / Patiomatt / WCUH / Chairman V V
69 Monza Cpe., 66 Monza vert, 65 Crown v8 Cpe.
Somewhere between Reno, NV and Coos Bay, Or.