<VV> Any other things I should know about POR?

[Jeff Schramm]

Clean the entire area with a degreaser and rinse thoroughly. POR will
not stick if there's any grease/oil at all. This includes oil from
your skin, so wear latex gloves. You want to wear gloves anyway
because any POR that gets on your skin will be there for a couple of
weeks.

POR wants some "tooth" in the metal, so any shiny metal needs to be
treated with an etching agent like Metal Ready.

Blow out all seams with compressed air to ensure everything is
completely dry. Then blow them out again.

If you're doing 2 coats then keep an eye on how quickly the first coat
cures. It will probably be sooner than you think. The second coat
should go on when the first is still a little bit tacky.

On Wed, 30 Mar 2005 10:44:18 -0800 (PST), Ryan Verthein
<chevyd51 at yahoo.com> wrote:
> I've done all of the prep I can with what I have,
> patched the floor, grinded some...and vaccumed like
> mad.  Are there any things I should keep in
> mind(besides a day with somewhere around 50% humidity
> and don't get water in the paint can) before I go to
> it?