<VV> Washers or no

[Larry Forman]

At 09:36 PM 3/27/2005 -0500, N. Joseph Potts wrote:
>All bolts have washers EXCEPT the bottom two - or four (forget which). Check
>your Classic Corvair, possibly also the Shop Manual. This is an assembly
>detail in manufacturing. And it's important (can interfere with flywheel).
>
>Joe Potts
>Miami, Florida USA
>1966 Corsa coupe 140hp 4-speed with A/C
>
>-----Original Message-----
>From: virtualvairs-bounces at corvair.org
>[mailto:virtualvairs-bounces at corvair.org]On Behalf Of GYoungwolf at aol.com
>Sent: Sunday, March 27, 2005 6:27 PM
>To: virtualvairs at corvair.org
>Cc: sthenry at bellsouth.net
>Subject: <VV> Washers or no
>
>Are there supposed to be washers under the bolts that mount the standard
>late
>model bell housing to the engine?
>Thanks,
>Grant

Hi Guys,
And while it was not part of the question, I believe the five or six 
special bolts for the flywheel and the flywheel strengthening ring does not 
use washers either.  But it does have something like aviation seal to 
prevent leaks there.

-- Larry