<VV> 65 Eng Rebuild

[Kurt Guttensohn]

Hey guys,
  I am in the middle of my engine rebuild.  Everything
is completly torn down, the crank is being ground at a
local machine shop, the cam is a big ?  If I am
reading everything correctly, the cam I pulled out of
my engine, does not belong there.  Here are the
details:
Block # T0516RD - 1965 Manual 110hp
Heads # 3856632 - 1964        110hp
Piston# 3819699 - 1964                164 cubic inches
                  1965-69 (exc. domed 164 cubic inches
Crank # 8409
Cam Gear# 6255610

Cam   # 3839889 - 1960-69     80,84,&95hp

What does having a cam specified for 80, 84, or 95 hp
do in an engine of 110hp?  I am assuming I should
order a new cam for #3872304(or sutable replacement)
Clarks offers several replacement cams for the 110hp
with different lift and duration.  
Would I be able to use the cam I pulled out of the
engine?  I am guessing my best bet is to get a new
one.
Thanks for your help.
Just wait till I get to the heads.
kurT


	
		
__________________________________ 
Celebrate Yahoo!'s 10th Birthday! 
Yahoo! Netrospective: 100 Moments of the Web 
http://birthday.yahoo.com/netrospective/