<VV> Testing Gas Tank Sender

[J R Read_HML]

30 for EM and 90 for LM

Attachments (if any) are scanned with anti-virus software.

Later, JR

----- Original Message ----- 
From: "Larry Forman" <Larry at forman.net>
To: <westerncanadacorsa at shaw.ca>; "WCC List Server (E-mail)" 
<corvairs at cybrus.net>; "Virtual Vairs (E-mail)" <virtualvairs at corvair.org>
Sent: Sunday, June 26, 2005 1:09 PM
Subject: Re: <VV> Testing Gas Tank Sender


>
> One lead connects to the pin that the sender wires goes to and the other 
> lead goes to the grounding terminal.  I think the resistance is somewhere 
> between 30 or 90 ohms.  I think it depends upon whether you have an Early 
> or Late tank and gas guage.  The resistance values might not be correct, 
> since I am just recalling from memory.
> Make darn sure you remember to connect the sender, it is impossible to 
> connect it without moving the tank back a little, unless you cut an access 
> hole from above.
>
> -- Larry
>