<VV> Bell housings

[Harry Yarnell]

Seems the early housing P/N begin with 625..., and the late (164) P/N begins
with 38...
There's also something about a silver dollar sized circle in the cam gear
cutout that's on one or the other, but can't remember which.

Harry Yarnell
perryman garage and orphanage
perryman, MD
hyarnell1 at earthlink.net

----- Original Message ----- 
From: <BobHelt at aol.com>
To: <chartzel at comcast.net>; <virtualvairs at corvair.org>
Cc: <fastvair at yahoogroups.com>
Sent: Thursday, June 23, 2005 10:46 AM
Subject: Re: <VV> Bell housings


> In a message dated 6/22/05 6:07:43 PM US Mountain Standard Time,
> chartzel at comcast.net writes:
>
> > Probably had something to do with
> > the slinger on early crankshafts.
>
> No.  It was a change in the hub associated with the rearward positioning
of
> the 164 cid stepped flywheel.
>
> Regards,
> Bob Helt
>  _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are
the property
> of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America,
http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options:
http://www.vv.corvair.org/mailman/options/virtualvairs
>  _______________________________________________