<VV> Re: Floor Pans

[corvair at mb.sympatico.ca]

Ah, but I'm talking about the hand held welder - one electrode in each hand. and you only need access to one side of the panel. Makes two spot welds at once, one at each electrode.

Les

> 
> From: "Garth  Stapon" <stapon1 at earthlink.net>
> Date: 2005/06/02 Thu PM 12:35:50 CDT
> To: <corvair at mb.sympatico.ca>, 
> 	<virtualvairs at corvair.org>
> Subject: Re: <VV> Re: Floor Pans
> 
> Les:
> 
> Spot welding may be difficult considering that the tong access might be 
> impaired.
> ----- Original Message ----- 
> From: <corvair at mb.sympatico.ca>
> To: <virtualvairs at corvair.org>
> Sent: Thursday, June 02, 2005 10:02 AM
> Subject: <VV> Re: Floor Pans
> 
> 
> > I'm surprised no one has mentioned the spot welder option. Should be 
> > easily rentable - a 2 handed electric spot welder has one electrode you 
> > hold in each hand and is used from one side of the joint. Fit the panel 
> > with some overlap, press down with the two electrodes anywhere on the 
> > joint, hit the button, and three seconds later you have a pair of spot 
> > welds. Repeat a couple hundred times and you have a secure welded joint. 
> > Metal should be painted with weld through primer first and sealed later 
> > with your choice of body sealant or paint.
> >
> > Les
> >
> >
> > _______________________________________________
> > This message was sent by the VirtualVairs mailing list, all copyrights are 
> > the property
> > of the writer, please attribute properly. For help, 
> > mailto:vv-help at corvair.org
> > This list sponsored by the Corvair Society of America, 
> > http://www.corvair.org/
> > Post messages to: VirtualVairs at corvair.org
> > Change your options: 
> > http://www.vv.corvair.org/mailman/options/virtualvairs
> > _______________________________________________
> > 
> 
> 
>