<VV> Re: HEATER ATTACHMENT

[Eric S. Eberhard]

I am interested in putting a gas heater in my wagon.  I have an NOS 
complete kit.  Is there anything else I need?  Where would I find the 
best instructions?  Thanks!

At 04:23 AM 7/24/2005, N2VZD at aol.com wrote:
>thomas,that heater is on 2 bolts to the cover. the holes are slotted so you
>just need to get under and look up at them. loosen them about 2 
>turns and slide
>the cover off. the box is heavy enough to feel like it wont budge but it
>will. same thing on fc's. i removed mine to put gas heaters 
>in.  look on each side
>of the differential, you can reach them with a long extension  or stretch
>yourself with a combo wrench.
>regards, tim colson
>  _______________________________________________
>This message was sent by the VirtualVairs mailing list, all 
>copyrights are the property
>of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
>This list sponsored by the Corvair Society of America, http://www.corvair.org/
>Post messages to: VirtualVairs at corvair.org
>Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
>  _______________________________________________

Eric S. Eberhard
(928) 567-3727          Voice
(928) 567-6122          Fax
(800) 569-1122          Denver Office (I am never there, you can 
leave a message)

928-301-7537 -- you may call any time day or night, I turn it off 
when I sleep :-)  Please try to use a land line first (reception often poor).



http://www.vicspdi.com

Completely updated web site of personal pictures with many new 
pictures!  Includes horses, dogs, Corvairs, and more.

http://www.vicspdi.com/ourpics/index.html

NEW Corvair pictures including the Judson setup on our 62 Sedan and 
lots of pictures of Cheryl's 62 Monza Wagon (with Kelsey-Hayes wire wheels).

http://www.vicspdi.com/ourpics/corvairs.html