<VV> Flat Towing Question

[J R Read_HML]

You already have a template.  The bumper.

Attachments (if any) are scanned with anti-virus software.

Later, JR

----- Original Message ----- 
From: "Padgett" <pp2 at 6007.us>
To: <virtualvairs at corvair.org>
Sent: Monday, July 18, 2005 12:45 PM
Subject: <VV> Flat Towing Question


>
>>  I did drill two additional holes (one on each side of the car
>>where the bumper mounts) so that the tow bar had 4 bolts (two on each 
>>side)
>>to attach it solidly to the car.
>
> Does anyone have a template for the necessary holes ? I have an older 
> towbar that has flat clips on the  top that I think could bend the LM 
> front bumper. I would prefer to use the four hole and bolts method after 
> removal of the front bumper but need to know where to drill the holes in 
> the face of each arm of the towbar. I have Mr. Finch's book but it does 
> not seem to provide a template.
>
> Padgett
>
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs 
> _______________________________________________