<VV> Removal of Casting Flash

[N. Joseph Potts]

Joe -
     Have you already shared with us what you attached to your Dremel to get
it to operate 3 inches down into the fins (where the flash is)? If not, do
tell!
     Got Dremel and flashed heads.

Joe Potts
Miami, Florida USA
1966 Corsa coupe 140hp 4-speed with A/C

-----Original Message-----
From: virtualvairs-bounces at corvair.org
[mailto:virtualvairs-bounces at corvair.org]On Behalf Of Joe West
Sent: Tuesday, July 12, 2005 8:28 PM
To: Mike Kost; VV
Subject: Re: <VV> Removal of Casting Flash


Mike,

I've used a Dremel tool, and I just can't imagine that anything could be
easier.  Dremel makes a grinding wheel that is the PERFECT spacing for the
fins and the narrow wheels work perfectly in tight spaces.

I don't think I'd use sand blasting  It is too hard to control where and how
much metal is removed.

Joe