<VV> High performance cooling

[Kent Sullivan]

My posts over the last five years on the vertical fan project have been
aimed primarily (if not exclusively--it's hard to remember) at FastVair. I
did not intend to post something until the prototype was back from the
welder's and then I was going to post to FV only. But when I saw the thread
already in progress here on VV I decided to jump in.

--Kent
-----Original Message-----
From: virtualvairs-bounces at corvair.org
[mailto:virtualvairs-bounces at corvair.org] On Behalf Of BBRT
Sent: Sunday, July 10, 2005 7:00 PM
To: Bryan Blackwell; Crawford Rose
Cc: virtualvairs at corvair.org
Subject: Re: <VV> High performance cooling

Bryan, True, but Fastvair was formed due to the comments about the high po
stuff at the time and amount of emails on vv, if you remember.  I have
always felt the above the "normal" street performance level should be
primarily discussed on FV.  I certainly do not think the info on how to
install the windshield trim and gasket on an early should be on FV.  In
addition, I feel the FV guys ought to get to hear the performance stuff as
that is what they are interested in.

Chuck S
BBRT
----- Original Message -----
From: "Bryan Blackwell" <bryan at skiblack.com>
To: "Crawford Rose" <crawfordrose at msn.com>
Cc: <virtualvairs at corvair.org>
Sent: Sunday, July 10, 2005 9:43 PM
  The VV charter includes any and all Corvair
> topics.
>
> --Bryan

 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are
the property of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org This list sponsored by the Corvair Society of
America, http://www.corvair.org/ Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
 _______________________________________________