<VV> spark plugs

[Bill Elliott]

If you used a set of Bosch Platinums (and you mean by "won't turn over" that the engine revolves but does not fire), welcome to the club. Though some folks 
run these with no problem, others (myself included) have cars that will barely run with them. This likely indicates a low voltage situation (possibly the breakdown 
of the resistor wire supplying the coil with less than optimal voltage or as you guess a potentially weak coil). Platinums appear to have a very low tolerance for 
such things.

Many (most?) of us run Bosch Supers (Coppers) in the old number of W8AC (the standard VW plug).  Not certain what the new part number is...

Bill Elliott

> 
>what are some opinions on the best plugs to use? i know that Delco is probably going to be popular with a lot of people, but what about Bosch?
> 
>I put a set of (correctly gapped) Bosch plugs in my '68 110HP and the car wouldn't turn over. put the old copper ones back in and everything was fine. i found 
that to be pretty weird. is this because my coil has lost some power?
>at any rate, i'd just like to see some opinions about the best plugs to keep everything smooth. 
>