<VV> Are the valves supposed to be movable by hand?

[J R Read_HML]

You can remove heads without pulling the engine.  You can get the rear of 
the engine supported on a jack and come down just far enough to clear the 
frame rails when removing the heads.

Attachments (if any) are scanned with anti-virus software.

Later, JR

----- Original Message ----- 
From: <aircooled6@prodigy.net>
To: <BobHelt@aol.com>; <virtualvairs@corvair.org>
Sent: Sunday, February 13, 2005 3:31 PM
Subject: Re: <VV> Are the valves supposed to be movable by hand?


> Thanks Bob.
>
> Ill look at the lifters.  The engine is as clean as a whistle inside, no
> crud, nothing.  The heads are the same.  I took the covers off and no crud
> there either.  Now I guess Ill have to pull the engine out to get the 
> heads
> off.  Dont really have room for that, but I am going to drive this thing
> this year!
>
> Everett Wilson
> North Richland Hills TX