<VV> Turbo Electric Choke adjustment

[UltraMonzaWest at aol.com]

In a message dated 2/1/2005 9:29:35 PM Pacific Standard Time, eggman@owt.com 
writes:

> If anybody has had any experience with these electric chokes 
> and getting the choke to open quick enough to get the fast idle cam out 
> of range of the linkage to allow the engine to idle normally without 
> the "cruise control" effect, your advice would be greatly appreciated.
> 
> Derek Archer
> 
*****************************************************************************
It's just an ordinary electric retrofit unit....should have arrows on the 
plastic to move to "rich /lean".......otherwise just loosen the screws...rotate  
oneway 1/8"...then drive it for a couple of days.....if it'sworse.....REVERSE 
the adjustment........

NOTE:  electric units should "open up"  with the ignition turned 
on........whether the engine is running or not!

Check to make sure you're getting 13-14 vdc   at the housing terminals...with 
engine running


Matt Nall / Patiomatt / WCUH / Chairman V V
69 Monza Cpe., 66 Monza vert, 65 Crown v8 Cpe.
Somewhere between Reno, NV and Coos Bay, Or.