<VV> More Pinion shaft hole> differential questions

[BBRT]

I remembered I had the one from Ken.  The hole is just at the end of the 
splines. One hole on one side of the pinion shaft. Hole is at the end 
opposite the smaller id which stops the splined shaft-or- on the end of the 
splines closest to the transmission. Same thing.
Chuck S
BBRT
----- Original Message ----- 
From: "BBRT" <chsadek at adelphia.net>
Subject: Re: <VV> differential questions


> Ken Hand drills a hole in the pinion shaft so I suggest you contact him at 
> vairmech at aol.com.
>

> Chuck S
> YS73
>
>
> ----- Original Message ----- 
> From: "John McMahon" <jmac2112 at adelphia.net>
>
>> Hi,
>>
>> I've got my differential apart due to a cracked throwout bearing, and I'm 
>> inspecting everything while I'm in there.  The internal splines on the 
>> pinion shaft are nice and square, and I'd like to keep them that way. 
>> Bob side?
>> Thanks,
>>
>> John McMahon