<VV> gas tank senders

[Dave Ziegler]

Tom, 61-64 senders are 30 ohms and the 65-69 are 90 ohms.

Dave.. .
On Aug 26, 2005, at 10:11 AM, tom zimmermann wrote:

> ...what's the difference between 61-64 senders,and 65-66 ones,if the 
> tanks fit 61-69...?? need to put a tank in a 62,have a couple from 
> 65's that don't leak and a sender from ?? that i cleaned the hoo-haa 
> out of that still seems to have a working 30-ohm unit ---plan to 
> solder a ground wire from the float rod to the inside tube,still 
> allowing for rod travel....are the senders different enough to not 
> work in the wrong year for some reason?..btw,used "chisel"gasket 
> remover,from Loctite,to eat the brown crap from inside the tin 
> cover...oven cleaner may work,also without damaging the resistance 
> wire,and is water-soluble....TIA--,Tom Z/66 corsa,65 monza/gutted in 
> grp-red,62 spyder and 65 corsa turbo arriving this weekend...plus 
> parts..
>
> 		
> ---------------------------------
>  Start your day with Yahoo! - make it your home page
>  _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights 
> are the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs
>  _______________________________________________
>
>
Corvair Therapy
mechanical repair
light restoration