<VV> Wheels (again)
jvhroberts at aol.com
jvhroberts at aol.com
Fri Aug 26 09:05:27 EDT 2005
Are there any GM front drivers with a 5 x 4.75" bolt circle?
-----Original Message-----
From: Sethracer at aol.com
To: louis at suffolknet.org; virtualvairs at corvair.org
Sent: Thu, 25 Aug 2005 23:12:38 EDT
Subject: Re: <VV> Wheels (again)
In a message dated 8/25/2005 5:47:00 PM Pacific Standard Time,
louis at suffolknet.org writes:
I've done a search and know the tire sizes and whatnot, but if I go
to the junkyard, what would be the latest model car that would have
14" steel rims that could go on a late model? I'd like to not look
like I have two heads when I ask for a 14" steel rim, 5 bolt 4 3/4
circle.
Chevy changed from 15" wheels to 14" wheels in 1957. All 57-72 Chevy full
size cars with 14" wheels will fit. They rarely got wider than 6" - but there
are 7" ones around. (The full size Buick/Olds/Pontiac/Cadillac, and 73-up
Chevy full size, used a 5 on 5" pattern - these won't fit) All
Chevelle/malibu/tempest/cutlass/etc wheels from 1964-72 (and mostly, beyond)
all
Camaro/Firebird wheels. All 5-lug Chevy II - Nova/ and BOP equals. In other
words - you
will have a tougher time finding a GM wheel that won't fit! Stay away from
Front Wheel Drivers!
Seth Emerson
Sethracer at aol.com
C's the day! Corvair, Camaro, Corvette
_______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are the
property
of the writer, please attribute properly. For help, mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America, http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs
_______________________________________________
More information about the VirtualVairs
mailing list