[fastvair] Re: <VV> Has anyone on the list BOUGHT Tom's coolingsystem

[Ron]

Very good!
RonH

----- Original Message ----- 
From: "Frank F Parker" <fparker at umich.edu>
To: <fastvair at yahoogroups.com>
Cc: <virtualvairs at corvair.org>; <crawfordrose at msn.com>
Sent: Friday, August 12, 2005 8:34 AM
Subject: Re: [fastvair] Re: <VV> Has anyone on the list BOUGHT Tom's 
coolingsystem


> >
>> So the whole project is now set. All we need is the cooling system from
>> Vairhouse.
>> I'll keep you posted on the availability and delivery of this cooling 
>> system
>> as I know you are as anxious as I to follow our progress and get the 
>> results.
>> Regards,
>> Bob Helt
>>
> The current plans are to use a 8 channel datalogger and take data on the
> following channels:
>  1. RPM
>  2. MAP   See see engine load
>  3. CHT Probably both heads with type K T/C
>  4. Oil temp To see if additional load is going
>  into oil system
>
>  5.Plenum pressure To see pressure in fan housing
>  made by stock and electric fans
>  6. TPS With 3 in linear pot to see throttle pos
>  7. Ambient temp
>
> Tests will be done on stock motor and fan setup and then after mods are 
> done. Data will be able to bbe plotted and compared channnel to channel
> and available as EXCEL file.
>
> regards,
>
> frank parker
>
> _______________________________________________
> This message was sent by the VirtualVairs mailing list, all copyrights are 
> the property
> of the writer, please attribute properly. For help, 
> mailto:vv-help at corvair.org
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
> Post messages to: VirtualVairs at corvair.org
> Change your options: 
> http://www.vv.corvair.org/mailman/options/virtualvairs 
> _______________________________________________
>