<VV> 17" wheels

[Dave Keillor]

Here's are article with instructions on making a simple wheel fitment tool:
http://www.chevyhiperformance.com/techarticles/92318/

Dave

-----Original Message-----
From: JVHRoberts at aol.com [mailto:JVHRoberts at aol.com]
Sent: Sunday, April 10, 2005 9:56 AM
To: jsconiers at mac.com; virtualvairs at skiblack.com
Subject: Re: <VV> 17" wheels


Sure, if you use a spacer. There are plenty of manufacturers out there who 
make them. That's a LOT of backside specing, and I doubt it'll clear
everything. 
There are also people who make measuring jigs to determine the best 
backspacing. Sounds like an investment in one of those would be worthwhile.

John

In a message dated 4/10/2005 12:46:26 AM Eastern Standard Time, 
jsconiers at mac.com writes:
All,
I would like to get some 17" wheels.  I've foud a set that is the 
correct bolt pattern (17x8, 5x4.75) however the backside spaciinig is 
5.95in instead of 4in.  Will this work?
JOHN
 _______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are
the property
of the writer, please attribute properly. For help,
mailto:vv-help at corvair.org
This list sponsored by the Corvair Society of America,
http://www.corvair.org/
Post messages to: VirtualVairs at corvair.org
Change your options: http://www.vv.corvair.org/mailman/options/virtualvairs 
 _______________________________________________