<VV> Noise in distributor

[BobHelt@aol.com]

In a message dated 9/6/04 10:17:40 AM US Mountain Standard Time, 
Mikeamauro@aol.com writes:

> in spinning from the gear end, with points plate 
> removed, there is a scraping noise heard from the inside (I assume) bearing 
> area.

I suggest that you find out what is causing that scraping noise. should be 
very easy to do...Just remove the hold-down frame on the weights and remove 
them. Then look around.
Regards,
Bob Helt