<VV> NOS Clutch Cable Installed: Problem STILL Not Solved

[J R Read_HML]

Insurance.

Attachments are scanned with anti-virus software.

Later, JR
----- Original Message ----- 
From: "Ron F Hinz" <ronh@owt.com>
To: "J R Read_HML" <hmlinc@sbcglobal.net>; "Shaun" <shaun_mcgarvey@shaw.ca>; 
<virtualvairs@corvair.org>
Sent: Thursday, October 07, 2004 12:50 AM
Subject: Re: <VV> NOS Clutch Cable Installed: Problem STILL Not Solved


> Why?  The bronze ones are cheap and last longer than clutches do.
> RonH
>
> ----- Original Message ----- 
> From: "J R Read_HML" <hmlinc@sbcglobal.net>
> To: "Shaun" <shaun_mcgarvey@shaw.ca>; <virtualvairs@corvair.org>
> Sent: Wednesday, October 06, 2004 10:25 PM
> Subject: Re: <VV> NOS Clutch Cable Installed: Problem STILL Not Solved
>
>
>> If it IS the pilot bushing... which seems quite likely...  you MIGHT want
> to
>> consider installing one of the roller bushings upon re-do.
>>
>> Attachments are scanned with anti-virus software.
>>
>> Later, JR
>> ----- Original Message ----- 
>> From: "Shaun" <shaun_mcgarvey@shaw.ca>
>> To: <virtualvairs@corvair.org>
>> Sent: Wednesday, October 06, 2004 11:10 PM
>> Subject: Re: <VV> NOS Clutch Cable Installed: Problem STILL Not Solved
>>
>>
>> > <Smit>
>> >> The input shaft seemed very tight when I fit it into the pilot 
>> >> bushing.
>> >> I
>> > think that this might be where the problem is.
>> >>
>> >> Charles
>> > <unSmit>
>> >
>> > Yes, this is the problem! When you drove the bushing in, you mushroomed
>> > the
>> > end enough to make the shaft too tight. You needed to pull the shaft 
>> > out
> a
>> > little and wallow out the end of the bushing slightly before 
>> > proceeding.
>> >
>> > yea, Vairily ... Shaun
>> > _______________________________________________
>> > This message was sent by the VirtualVairs mailing list, all copyrights
> are
>> > the property
>> > of the writer, please attribute properly. For help,
>> > mailto:vv-help@corvair.org
>> > This list sponsored by the Corvair Society of America,
>> > http://www.corvair.org/
>> > Post messages to: VirtualVairs@corvair.org
>> > List info: http://www.vv.corvair.org/mailman/listinfo/virtualvairs
>> > _______________________________________________
>>  _______________________________________________
>> This message was sent by the VirtualVairs mailing list, all copyrights 
>> are
> the property
>> of the writer, please attribute properly. For help,
> mailto:vv-help@corvair.org
>> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
>> Post messages to: VirtualVairs@corvair.org
>> List info: http://www.vv.corvair.org/mailman/listinfo/virtualvairs
>>  _______________________________________________