<VV> RE: VirtualVairs digest, Vol 1 #422 - 14 msgs

Mon, 17 May 2004 12:44:02 -0400 (EDT)

 In working under the dash you probably disturbed the connector that links the rear harness with the under-dash harness.

It is a flat, wide connector with about 10 pins in it, right next to the radio.  Mine lost touch a few times in the past, knocking out some or all of the red lights in the rear.  You can open it up and clean it; just make sure the battery's disconnected first.

Michael Smith
Dallas

From: "Steve Ziegler" &lt;sziegler@cox.net&gt;To: &lt;virtualvairs@corvair.org&gt;Date: Mon, 17 May 2004 09:04:24 -0500Subject: &lt;VV&gt; Tail and Brake Lights Gone!Hello: I installed a new radio in my '64 Monza over the weekend...Prior toinstallation, I removed the ground cable from the negative terminal of thebattery...At this time, the tail and brake lights were working fine...Afterinstallation of the radio, I reconnected the ground...Everything electrical onthe car works, except for the tail and brake lights...The car starts and runsfine...The rear turn indicators work, but still no tail or brake lights! Ihave checked all of the fuses and plugs/sockets under the dash and they allseem to be tight...Help! Any ideas will be appreciated!SteveWichita, KS

_______________________________________________
Join Excite! - http://www.excite.com
The most personalized portal on the Web!