<VV> Dual Master comment (Disk Brake)
RoboMan91324@aol.com
RoboMan91324@aol.com
Mon, 10 May 2004 17:11:48 EDT
I am not an expert but isn't there a balance adjustment for front to rear on
dual master cylinders? I suspect that the front to rear braking requirements
are addressed on stock single MC Corvairs by the different sizes of the brake
shoes and drums. I would imagine that a disk brake setup would throw this off
significantly to the point that a balance adjustment would be required. You
don't want one set of wheels locking up in an emergency braking episode. Is
this correct? If so, I would guess that you don't want to use a disk brake
setup with a single MC.
Doc
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In a message dated 05/07/04 3:35:05 PM Pacific Daylight Time,
virtualvairs-request@corvair.org writes:
> Message: 6
> From: EUGENE1938@aol.com
> Date: Fri, 7 May 2004 16:29:18 EDT
> Subject: Re: <VV> Dual Master comment
> To: pottsf@msn.com, virtualvairs@skiblack.com
>
> pottsf@msn.com writes:
> Personally, I would value disk brakes much more than dual master cylinder on
> my 66.
> Joe,
> Why not both? The disks cost much more than a dual master cylinder. If you
> can afford the disks go a few more dollars and get the dual master cylinder
> also. You site safety first, well that would be safety first.
>
> Ed Corson (CORSA member)
> IECC - Riverside, CA