<VV> Minor correction....> pilot bearing

[Sadek Charles H DLVA]

I was referring to the directions WAPRT uses about "grease a**".  Sorry,
should have given the regular version; just use grease! <VBG>

Still LOL

Chuck S

-----Original Message-----
From: Sadek Charles H DLVA [mailto:SadekCH@nswc.navy.mil] 
Sent: Friday, July 23, 2004 2:43 PM
To: 'lloyd biggerstaff'; virtualvairs@corvair.org
Subject: RE: <VV> pilot bearing

Me first!  Fill with axle grease, insert drive shaft/mainshaft, get block of
wood to protect other end and drive the shaft in with a hammer or sledge.
Fill with more grease ass required and grease under pressure behind bushing
forces it out.

Chuck S

YS73

-----Original Message-----
From: lloyd biggerstaff [mailto:lloydscorvan@yahoo.com] 
Sent: Friday, July 23, 2004 2:38 PM
To: virtualvairs@corvair.org
Subject: <VV> pilot bearing

What is the best way and the easiest to pull a pilot bearing out of the
crank?Any suggestions would be appreciated.Thanks.
_______________________________________________
This message was sent by the VirtualVairs mailing list, all copyrights are
the property
of the writer, please attribute properly. For help,
mailto:vv-help@corvair.org
This list sponsored by the Corvair Society of America,
http://www.corvair.org/
Post messages to: VirtualVairs@corvair.org
List info: http://www.vv.corvair.org/mailman/listinfo/virtualvairs 
_______________________________________________