<VV> Cold Valve Adjust - another take

[BobHelt@aol.com]

In a message dated 7/12/04 3:26:24 PM US Mountain Standard Time, 
GYoungwolf@aol.com writes:

> I stumbled onto the "tricks" - which are (for me) to have 
> oily fingers when checking the movement/turn of the pushrod, and to ensure 
> that the lifters are "pumped up" before starting.

Grant,
I've been saying for years now that you should NOT rotate the pushrods, BUT 
move them in-and-out until there ceases to be any movement while you tighten 
the adjusting nut.
Regards,
Bob Helt