<VV> Universal Sender Unit

[Charles Morgan]

The method Mark recommends is probably the simplest method but it won't be 
accurate except at the two extremes (empty and full).  In between the gauge 
will read too high.

Charlie Morgan
Beaver State Corvairs


At 10:06 AM 2/24/04, Mark J. Murphy wrote:
>If I remember correctly, to use a newer style sending unit you need a 1 watt
>(minimum) 47 ohm resistor connected in parallel on the sending unit. You
>solder the resistor between the terminal post where the sending unit wire
>connects and the metal base of the sending unit.  Hopefully if I'm wrong any
>electrical engineers out there will correct me. :)