<VV> Special Oil Filter Bolt for Sender

[AKG]

I ran some #4 braided hose from the stock sender mount to the side of the
engine compartment and screwed all of the senders into an aluminum block I
made.  The plus all of those pesky wire are no longer on the engine..

The Artful Dodger


Hey everybody:

I have one of those special oil filter bolts that allow a sender for a gauge
to be threaded into it.

I have a brass T with the oil pressure gauge sender and the oil pressure
switch in it.  The temp sender is in the stock oil pressure switch location.

Anyway, the bolt does not ground to anything when it is installed.
Therefore, the senders will not function.  I came up with a quickie
temporary solution by taking a piece of galvanized steel wire and wrapping
one end around the base of the T and the other end around the fuel pump
block-off bolt.

Does anyone have a more professional looking solution to this?

Charles