<VV> 65 AM/FM Wiring

[Roger Gault]

I love this list!

Thanks,
  Roger

----- Original Message ----- 
From: <aircooled6@prodigy.net>
To: "Roger Gault" <r.gault@sbcglobal.net>; "Corvair List"
<virtualvairs@corvair.org>
Sent: Monday, April 12, 2004 8:25 PM
Subject: Re: <VV> 65 AM/FM Wiring


> Roger,
>
> In my 67, (I just looked under the dash) Power (ylw) is the outside
(right,
> looking at it from the back)  Green is middle and black with green is
inside
> (left, looking at it from the back)
>
> It appears that the non-12V wires go right up to the speaker.
>
> view from the back of the radio
> ----------------------------
> I                          I
> I         blk / grn / ylw  I
> I        w/grn             I
> ----------------------------
>
>
> Hope that helps
>
> Everett Wilson
> North Richland Hills TX
> 67 500 4dr 110/pg/ac
> 64 Greenbrier 110/pg
>
> > From: "Roger Gault" <r.gault@sbcglobal.net>
> > Date: Mon, 12 Apr 2004 18:39:24 -0500
> > To: "Corvair List" <virtualvairs@corvair.org>
> > Subject: Re: <VV> 65 AM/FM Wiring
> >
> > Ah, yes, but some time in the distant past, when putting in either my
old
> > cassette tape or my current CD player, I cut the connector off the
harness.
> > So, while I know that the black/yellow wire is +12V, I am clueless as to
> > where it went on the radio.
> >
> > Now, I'm trying to figure out if the radio works and need to hook it up
to a
> > 12V source and a speaker.  So, what I need is something like, "The
outside
> > connection is +12V, the next one is XXX, and the inside one is YYY."
> >
> > Sorry I wasn't clearer,
> > Roger
> >
> >
> > ----- Original Message -----
> > From: "Tony" <tonyu@roava.net>
> > To: <virtualvairs@corvair.org>
> > Sent: Tuesday, April 13, 2004 1:00 AM
> > Subject: Re: <VV> 65 AM/FM Wiring
> >
> >
> >> At 1726 04/11/2004 -0500, Roger Gault wrote:
> >>> Can someone tell me how the '65 AM/FM radio is wired?
> >>> There are three terminals on the back, and I no longer have the
harness
> > that
> >>> connects to it.
> >>>
> >>
> >>
> >>
> >> Identical to the production AM-only radio wiring.   The plugs
interchange.
> >>
> >>
> >>
> >> tony..
> >> _______________________________________________
> >> This message was sent by the VirtualVairs mailing list, all copyrights
are
> > the property
> >> of the writer, please attribute properly. For help,
> > mailto:vv-help@corvair.org
> >> This list sponsored by the Corvair Society of America,
> > http://www.corvair.org/
> >> Post messages to: VirtualVairs@corvair.org
> >> List info: http://www.vv.corvair.org/mailman/listinfo/virtualvairs
> > _______________________________________________
> > This message was sent by the VirtualVairs mailing list, all copyrights
are the
> > property
> > of the writer, please attribute properly. For help,
mailto:vv-help@corvair.org
> > This list sponsored by the Corvair Society of America,
http://www.corvair.org/
> > Post messages to: VirtualVairs@corvair.org
> > List info: http://www.vv.corvair.org/mailman/listinfo/virtualvairs