[V8Vairs] upper strut on LM rear suspension

[Marty Scarr]

Mike

Jim Acker used a 915 transaxle in his V8 conversion and had some of the same
issues.  You can read about his solutions here:

http://www.corvair.org/chapters/chapter981/V8Vair/index.html

<http://www.corvair.org/chapters/chapter981/V8Vair/index.html>Marty Scarr

On Wed, May 11, 2011 at 10:07 AM, Michael Svinth <msvinth at hotmail.com>wrote:

>
> My build is a mid-mounted Subaru 3.3l with a 5 speed transaxle in a '65.
>  By using cv half shafts, I am aware of the need for an upper strut to
> handle the side loads.  The transaxle(UN1) does not have suspension mounting
> points so will have to attach everything to the cage/body member.  Could
> those of you that have tackled this problem share your ideas, what your did,
> what you would do different etc.  With the need for neg camber gain, I find
> this a bit confusing.
> Thanks in advance from a newbie
> Mike
> _______________________________________________
> V8Vairs mailing list
> V8Vairs at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/v8vairs
> This list sponsored by the Corvair Society of America,
> http://www.corvair.org/
>