[V8Vairs] Residual Valve on MC....

[Secular]

  Thank you Matt - I intend to change the clutch slave cylinder also,
  Do you have a suggestion which matches this MC?

  Would have a part # from NAPA for a slave cylinder?
  [the engine is a 327 SBC].

  Regards,


  Tony I. 

  ----- Original Message ----- 
  From: PatioMatt at aol.com 
  To: v8vairs at corvair.org 
  Sent: Tuesday, March 03, 2009 6:01 PM
  Subject: Re: [V8Vairs] Residual Valve on MC....




   
  In a message dated 3/3/2009 2:30:10 P.M. Pacific Standard Time,  
  rusecular at yahoo.com writes:

  http://tinyurl.com/mc-truck 

  The port going to my V8's  clutch pedal is the port marked "brake" on the MC. 

  How do I  move the residual valve from the section marked "Brake"
  on the MC?  to the port marked "clutch"?


  ==================================================
   
   Should pry out... use an awl..
   
  Matt




  **************A Good Credit Score is 700 or Above. See yours in just 2 easy 
  steps! 
  (http://pr.atwola.com/promoclk/100126575x1219957551x1201325337/aol?redir=http:%2F%2Fwww.freecreditreport.com%2Fpm%2Fdefault.aspx%3Fsc%3D668072%26hmpgID
  %3D62%26bcd%3DfebemailfooterNO62)
  _______________________________________________
  V8Vairs mailing list
  V8Vairs at corvair.org
  http://www.vv.corvair.org/mailman/listinfo/v8vairs
  This list sponsored by the Corvair Society of America, http://www.corvair.org/