[V8Vairs] Help with Hyd Clutch

[Don Stephens]

Looking for some advice on where to get a clutch m/c and what size. As 
per previous notes, I have been told that I should get a m/c bore size 
close to the slave cylinder's bore. As bought, my car had an old Chevy 
truck combo cylinder. I don't know what the bore size for this thing 
was. I plan to keep using the brake side for the brakes until I reach 
some conclusion about what brakes I want to put on it. I'd like to get 
it running again to determine what else needs to be done, then, 
(Sigh...) pull it all apart.

The slave is now a 15/16" bore and I'd like to use a m/c that has the 
horizontal mounting holes , and also has about a 15/16" bore.

Is there an Internet source for the m/c, and if so, could someone point 
me to the URL?

I am going to try to get to the Portland meeting and catch up with some 
of you guys and do some serious bench racing.

Thanks;

Don