[FC] Removing lower control arm

[Bryan Blackwell]

I'm pretty sure that's a slip fit and likely rusted together.  I would try penetrant and time, but if that doesn't work and you can get a replacement, I've used a recip saw on cars.

--Bryan

> On Apr 2, 2018, at 12:58 PM, Jon Peters via Corvanatics <corvanatics at corvair.org> wrote:
> 
> Is the large bolt on the lower control arm of my '62 Rampside, threaded into the bushing arm? I'm tiring to remove it to replace lower bushings but not sure if its threaded on that large bolt, of just rusted on a slip fit bolt.Thanks