[FC] Window cranks

[N2VZD at aol.com]

IF you have Deluxe door panels without the correct regulator and door  
actuator assemblies (with longer shaft)  it about impossible to put the  handles 
on.  So you probably need parts...
Regards, Tim Colson
 
 
In a message dated 8/5/2017 6:42:40 P.M. Eastern Daylight Time,  
corvanatics at corvair.org writes:

OK, I  have tried a variety of window cranks and bottom line is I cannot 
get them  tight enough to stay on.  First the darn screw is too inaccessible 
when  you put on the crank to tighten, yes I have padded door cards, and 
second the  end of the regulator sticking out of the door is chewed up.  Any  
suggestions as to a good crank and where to get it.  I bought the ones  from 
Clark and no dice.........same  problem.


Thanks,


Fred Adler

1961  Rampside
_______________________________________________
Corvanatics  mailing  list
Corvanatics at corvair.org
http://www.vv.corvair.org/mailman/listinfo/corvanatics
This  list sponsored by the Corvair Society of America,  
http://www.corvair.org/