[FC] Rampside Light Switch
Moulton, Robert M - (rmoulton)
rmoulton at email.arizona.edu
Tue Mar 1 21:31:20 EST 2016
Fred
I remember having the same issue w/ the light switch on my '65 4dr sedan. The contacts in the rheostat get dirty and start causing issues.
Bob
________________________________________
From: Corvanatics <corvanatics-bounces at corvair.org> on behalf of corvanatics-request at corvair.org <corvanatics-request at corvair.org>
Sent: Tuesday, March 1, 2016 10:00 AM
To: corvanatics at corvair.org
Subject: Corvanatics Digest, Vol 134, Issue 1
Send Corvanatics mailing list submissions to
corvanatics at corvair.org
To subscribe or unsubscribe via the World Wide Web, visit
http://www.vv.corvair.org/mailman/listinfo/corvanatics
or, via email, send a message with subject or body 'help' to
corvanatics-request at corvair.org
You can reach the person managing the list at
corvanatics-owner at corvair.org
When replying, please edit your Subject line so it is more specific
than "Re: Contents of Corvanatics digest..."
Today's Topics:
1. 1961 Rampside - 2 problems (Fred Adler)
----------------------------------------------------------------------
Message: 1
Date: Mon, 29 Feb 2016 23:14:45 +0000
From: Fred Adler <fadler at genbio.com>
To: "corvanatics at corvair.org" <corvanatics at corvair.org>
Subject: [FC] 1961 Rampside - 2 problems
Message-ID:
<BY2PR0401MB104852ADE0E7F89F50209F0FA5BA0 at BY2PR0401MB1048.namprd04.prod.outlook.com>
Content-Type: text/plain; charset="iso-8859-1"
OK, two new problems.....................................
Problem 1
I tried the lights the other night and no dash lights and no tail lights. At first I turned the rheostat to see if that was it and left it in full clockwise position. Looking in the manual, I found a 15 amp fuse blown. I put in a new fuse and it blew it again. Remembering the rheostat light switch, I turned it back counter clockwise. A new fuse again and this time it did not blow. SO, is the light switch bad? I can drive with tail lights and low dash lights but I can replace it also if I can find one.
Problem 2
I got into the "POWERGLIDE" Rampside today to haul something and turned the key and NADA. Guages light up, electric fuel pump runs so the ignition switch must be engaging. I checked it was in NEUTRAL. I tried to start in NEUTRAL and all other gears (there are only R, D and L). Still nothing. I remember there is a safety cut off somewhere so you can't crank outside of NEUTRAL. Now what do I need to replace and where do I get one?
THANKS from a frustrated Rampie guy.
Fred Adler
San Diego
------------------------------
Subject: Digest Footer
_______________________________________________
Corvanatics mailing list
Corvanatics at corvair.org
http://www.vv.corvair.org/mailman/listinfo/corvanatics
This list sponsored by the Corvair Society of America, http://www.corvair.org/
------------------------------
End of Corvanatics Digest, Vol 134, Issue 1
*******************************************
More information about the Corvanatics
mailing list