[FC] Two things about the Power Glide shifter

[BBRT]

Can someone take a picture and post it for Fred? Or scan a document that 
shows the PG versioon on an FC? I'd like to know, too.

Chuck Sadek
BBRT
Vair Fast Engr.
Corvair racers, street cars and one FC project.
----- Original Message ----- 
From: "Fred Adler" <fadler at genbio.com>
To: <corvanatics at corvair.org>
Sent: Wednesday, March 12, 2014 12:11 PM
Subject: [FC] Two things about the Power Glide shifter


> The newly acquired Rampside I bought has two things that should be simple 
> to fix but I figured I would ask.
>
>
> 1.        I found the "trim" piece that fits on the dash semi-surrounding 
> the Power Glide shift lever.  It was painted metal and is shaped like a 
> "U" with two screw holes on the open side of the "U".  Does that slip 
> under the dash guage ring?  Pictures appreciated.
>
> 2.       The "R,N,D,L" label on the shifter is missing under the clear 
> plastic window.   I found a shifter with a piece of broken one to help me 
> size it but is it a major thing to replace that with a homemade one since 
> it seems you can't find a replacement one?  Does it fit into a groove on 
> the shifter assembly?  I just want to continue to put things back as close 
> to original as possible.
>
> Thanks,
>
> Fred Adler
> San Diego
> _______________________________________________
> Corvanatics mailing list
> Corvanatics at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/corvanatics
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/
>
>
> -----
> No virus found in this message.
> Checked by AVG - www.avg.com
> Version: 2013.0.3462 / Virus Database: 3722/7180 - Release Date: 03/11/14
>