[FC] help needed... replace oil pressure sender

[hallgrenn at aol.com]

Even better Merv, buy yourself a proper oil pressure switch socket to be sure you don't break the seal and have a new, but leaky, switch.  
The oil pressure switch/sender socket was a standard part for decades--it may still be for today's cars.
 
Bob
 
 
-----Original Message-----
From: Larry Forman via Corvanatics <corvanatics at corvair.org>
To: corvanatics <corvanatics at corvair.org>
Sent: Fri, Aug 8, 2014 3:15 pm
Subject: Re: [FC] help needed... replace oil pressure sender


Merv,
Above - by the oil filter .   Do NOT use a set of pliers to remove.   
Use a proper socket 1-1/16", as I recall.   Get one from LFAPS.

Larry

On 8/8/2014 12:05 PM, Merv Krull via Corvanatics wrote:
> Hi all!
>
> Aw hec...! I can’t even take the greenbrier to the big show at Haney Village 
this year. The oil pressure switch is leaking pretty bad. Got a new one from 
Clarkes and I need a little guidance...
>
> Do I get at it from underneath or above?
>
>
> toodles
> Merv Krull
> Salmon Arm, BC
> _______________________________________________
> Corvanatics mailing list
> Corvanatics at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/corvanatics
> This list sponsored by the Corvair Society of America, http://www.corvair.org/


---
This email is free from viruses and malware because avast! Antivirus protection 
is active.
http://www.avast.com

_______________________________________________
Corvanatics mailing list
Corvanatics at corvair.org
http://www.vv.corvair.org/mailman/listinfo/corvanatics
This list sponsored by the Corvair Society of America, http://www.corvair.org/