[FC] seats

[J. R. Read]

It sounds as if you are talking about the latch in your description.  Did 
you look at the pictures of my (unmashed) one?  This is on a '61 Standard 
Rampside.

Later, JR

----- Original Message ----- 
From: <wern3 at juno.com>
To: <corvanatics at corvair.org>
Sent: Thursday, April 24, 2014 8:22 AM
Subject: [FC] seats


> FRedI have an early '61 Rampy and there is no latch. On mine the only 
> seatback adjustment provided is a largish bolt that protrudes from the 
> bottom of the steel backrest frame. There is a steel "shelf" or bracket, 
> that the bolt head rests on. Over the years the "shelf/bracket" was bent 
> downward allowing the backrest angle to tilt backwards farther than 
> designed. I bent the "shelf"/bracket back to its' original position and 
> then welded brace to it.Tim werner
> ____________________________________________________________
> The #1 Worst Carb Ever?
> Click to Learn #1 Carb that Kills Your Blood Sugar &#40;Don&#39;t Eat 
> This!&#41;
> http://thirdpartyoffers.juno.com/TGL3141/53591047957be1047326cst01vuc
> _______________________________________________
> Corvanatics mailing list
> Corvanatics at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/corvanatics
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/ 


---
This email is free from viruses and malware because avast! Antivirus protection is active.
http://www.avast.com