[FC] windshield wipers progress-II

[Danny Davis]

Sounds like the switch has been replaced.  If you've got the singel speed
motor with two terminals, you need only have an ignition switched power
source and a ground thru the panel switch to make it work.
Ignore all the other connections/wires.


Dan



On Fri, Apr 19, 2013 at 10:04 AM, wern3 at juno.com <wern3 at juno.com> wrote:

> Danny
> Thanks for your help. I do have the printed - out page from that shop
> manual here with me. The problem I have with the diagram is that it does
> not match the reality I see when i remove my instrument panel. The wiring
> diagram shows a single post connector on the back of the switch, and the
> switch itself seemingly grounded to the instrument panel.
> On my truck, The two prong plug on the back of the wiper switch with its
> brown has it's two spade connectors arranged like a chevron or right angled
> "V"  with the top of the V at the 12 O clock position. I will trace both of
> those wires on the back of the switch and hope to find an empty  female
> plug that the red wire with its male plug from the wiper motor can attach
> to.
> More to come.
> TimW
>
>
>
> ____________________________________________________________
> *How to Sleep Like a Rock*
> Obey this one natural trick to fall asleep and stay asleep all night.
> <http://thirdpartyoffers.juno.com/TGL3142/517179487a25f79482d42st02vuc>
> peaklife.com<http://thirdpartyoffers.juno.com/TGL3142/517179487a25f79482d42st02vuc>




-- 
Danny Davis
Seattle
206-643-6718