[FC] Patricks shifter

[wern3 at juno.com]

I too had a sloppy "mystery shifter" . I looked at the "coupler" end, saw the elongated holes  and took a lowbrow approach. I neither recommend nor denigrate my solution, I simply mention it as this happened after the money ( and patience) ran out for this project.  I went to the  "Hillman" section of the local tru Value and bought several nylon washers of varying thickness. Using the nylon washer on the outside of the coupler along with a larger steel washer under the head of the bolt and at the far end under the  nut  that fit the shifter pin - hole tightly, I tightened the  bolt using the pressure of the steel washers to compress the nylon washers into the ovalled- out holes. Yes it looks bad but the shifter works well, I can actually "feel" the thing when I  finally am able to  finesse it into reverse. Tim W . 1961 rampy 140 4 - spd 
____________________________________________________________
Woman is 53 But Looks 25
Mom reveals 1 simple wrinkle trick that has angered doctors...
http://thirdpartyoffers.juno.com/TGL3141/50b4f94c5019a794c47a3st01vuc