[FC] FC overload springs Revisited ... anyone?

[Ken Hand]

-------- Original Message --------    
      
        
          
Subject: 
          
FC overload springs Revisited ... anyone?
        
        
          
Date: 
          
Tue, 22 May 2012 11:48:25 -0700
        
        
          
From: 
          
doug bell <doug.bell3 at comcast.net>
        
        
          
To: 
          
corvanatics at corvair.org
        
      
    
    
    
    
Springs may not be the correct term for they do not look like springs.
More like a bar with two rubber pads on one end that might sandwich the 
lower control arm and the other end that might bolt onto the frame rail 
near where the E. brake bracket is welded.
On the frame rail near the rear is a hole with a welded nut in place.  
The hole in the end of the overload bar(?) lines up with the hole on the 
frame rail when the other end with the two rubber pads are sandwiching 
the control arm.  I will attempt to include photos.
Anyone have experience with these?
Thanks
Doug
61 Rampside