[FC] Brake lights

[BBRT]

Check your dome light circuit and sw if Rampy's have them. Seems to me that 
is where I had a problem on a van re tail light out years ago..

Chuck S
----- Original Message ----- 
From: "hugh" <hugpeg at embarqmail.com>
To: <corvanatics at corvair.org>
Sent: Thursday, October 21, 2010 11:47 AM
Subject: [FC] Brake lights


>I am working on getting my rampy's tail lights working once again.
> I have the running lights done.
> When under the front end I found one orange and one white lead coming out 
> of a breakout.  Also another lead already plugged into the switch.  The 
> orange lead has a push on connector on it but the white lead is bare. 
> Since the area is somewhat confined I removed the switch to test it. 
> Works fine.  Continuity oddly enough is between the connector that was on 
> the switch and the connector less white lead.  Nothing with the orange 
> lead.  Anyone know what the orange lead might go to?  Shop manual shows a 
> white and an orange only.  One that was on the witch must simply be 12 
> volts.  Does the orange have something to do with the directional's?
> Thanks
> Hugh
> _______________________________________________
> Corvanatics mailing list
> Corvanatics at corvair.org
> http://www.vv.corvair.org/mailman/listinfo/corvanatics
> This list sponsored by the Corvair Society of America, 
> http://www.corvair.org/


--------------------------------------------------------------------------------



No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.448 / Virus Database: 271.1.1/3209 - Release Date: 10/20/10 
18:34:00